Jeep Workshop Service and Repair Manuals > Liberty 2WD V6-3.7L (2008) > Powertrain Management | Transmission Control Systems | Sensors and Switches - Transmission and Drivetrain | Sensors and Switches - A/T | Transmission Temperature Sensor/Switch, A/T | Component Information | Service and Repair

Page 1

Transmission Temperature Sensor/Switch: Service and Repair
Removal

REMOVAL

1. Remove valve body assembly from vehicle.See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and

Repair/Removal and Replacement/Removal

2. Remove the manual shaft seal (1).

3. Remove manual shaft/TRS retaining screw (1).
4. Slide TRS off of manual valve shaft.

Jeep Workshop Service and Repair Manuals