Liberty 2WD V6-3.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Removal
Pressure Hose
PRESSURE HOSE
1. Siphon out as much power steering fluid as possible.
2. Remove air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Filter
Element/Service and Repair/Removal.
3. Remove the washer/coolant reservoir assembly.
4. Remove the fan shroud.
5. Remove power steering belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Accessory Drive Belt - Removal
6. Remove pressure hose (3) at the pump.
7. Remove the pressure hose (2) from the gear.
8. Remove the pressure hose (1) mounting bolts (2) to the frame.
9. Remove the pressure hose (1) from the vehicle.
Return Hose - Cooler To Reservoir
RETURN HOSE - COOLER TO RESERVOIR