Liberty 2WD V6-3.7L (2008)
Steering Shaft: Service and Repair
Intermediate Shaft - Removal
3.7L & DIESEL
1. Disconnect the negative battery cable.
2. Remove knee blocker cover and knee blocker, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
NOTE: The steering column on vehicles with an automatic transmission may not be equipped with an internal locking shaft that allows
the ignition key cylinder to be locked with the key. Alternative methods of locking the steering wheel for service will have to be used.
3. Lock the steering wheel with the tires in the straight ahead position.
4. Remove the lower column pinch bolt (2).
5. Lower the steering coupler (1) shaft from the column.
6. Remove the intermediate shaft seal by pushing in the four tangs (2) securing it to the panel.
