Liberty 2WD V6-3.7L (2008)
Ball Joint: Service and Repair
Front Lower Ball Joint - Removal
REMOVAL
1. Remove the tire and wheel assembly.
2. Remove the brake caliper and rotor See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal.
3. Separate the tie rod (1) from the steering knuckle (3) using special tool 9360 (2)See: Steering/Tie Rod/Tie Rod End/Service and Repair/Tie Rod
End - Removal.
4. Separate the upper ball joint from the knuckle (3) using special tool 9360 (2).