Liberty 2WD V6-3.7L (2008)
Shift Interlock Cable: Adjustments
ADJUSTMENTS - PARK-INTERLOCK CABLE
The park-interlock cable is part of the Brake Transmission Shift Interlock (BTSI) system. Correct cable adjustment is important to proper interlock
operation. The gear shift and park lock cables must both be correctly adjusted in order to shift out of PARK.
1. Remove floor console as necessary for access to the park-interlock cable.
2. Shift the transmission into the PARK position.
3. Turn ignition switch to LOCK position. Be sure ignition key cylinder is in the LOCK position. Cable will not adjust correctly in any other
position.
4. Pull cable lock button up to release cable (3).
5. Ensure that the cable is free to self-adjust by pushing cable rearward and releasing.
6. Push lock button down until it snaps in place.
7. Verify proper operation. See: Testing and Inspection
8. Install the floor console and related trim.
