Liberty 2WD V6-3.7L (2008)
NOTE: The door glass must be in the full up position in order to access the rear exterior handle nut. Use light and a magnetic socket on the
rear nut to prevent from dropping the nut into the door assembly.
11. Install the rear nut (1) to the exterior handle and tighten to 4.5 Nm (40 in. lbs.).
12. Install the door plug (2) to the door.
13. Install the trim panel to the door See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front
Door Trim Panel - Installation.
