Liberty 2WD V6-3.7L (2008)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Removal
REMOVAL
1. Remove the trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Removal.
2. Rotate the inner belt molding outboard while pulling up to disengage the retention tabs.
NOTE: Place the glass in the full down position in order to access the window regulator.
3. Access the window regulator through the hole in the carrier plate. Disconnect the window regulator (2) from the door glass (1).
