Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
Rear Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Remove the bolts (4).
2. Remove the latch striker (3) and the spacer (2), if equipped.
INSTALLATION
1. Install the striker (3) and spacer (2), if required.
2. Install the bolts (4) and tighten to 28 N.m (21 ft.lbs.).
3. Adjust the door as necessary. Refer to Body and Frame / Specifications / Dimensions.
