Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
Differential Output Shaft Bearing: Service and Repair
BEARING-AXLE
REMOVAL
1. Remove half shaft.
2. Remove axle shaft for right side seal removal.
3. Remove shaft seal with Remover 7794-A and a slide hammer.
4. Remove shaft bearing (1) (Fig. 41) with Remover 7794-A (2) and a slide hammer.
INSTALLATION
1. Install new shaft bearing with Installer 8805 and Handle C-4171.
2. Apply a light coat of lubricant on the lip of the shaft seal.
3. Install new shaft seal with Installer 8806 (1) (Fig. 42) and Handle C-4171 (2).
4. Install right axle shaft if removed.
5. Install half shaft.
