Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
7. Remove the three # 20 Torx screws securing the motor and bracket to the regulator drum. Keep the motor and bracket together for reassembly (Fig
3).
8. Remove the original lift plate and cable from the regulator and discard (Fig 4).
NOTE:
If the cable is stuck in the drum housing. Push the cable forward to dislodge any debris or plastic chips that may be on the end of the cable in the
drum pocket. Unscrew the cable counter clock wise if necessary to free up the chip or debris.
