Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
2. ** Is the window concern related to the Window motor, the cable tube, attachment bracket or is the regulator rail damaged? **
a. No >>> Proceed to Step #3 to repair the lift plate attachment.
b. Yes >>> STOP, this bulletin does not apply. The window regulator will need to be replaced by following the procedures in DealerCONNECT >
TechCONNECT under:
Service Info > 23 - Body > Door > Regulator, Window, remove/install.
3. Following the procedures in DealerCONNECT > TechCONNECT under: Service Info > 23 - Body > Door > Regulator, Window, remove the
window regulator from the affected door(s).
4. With the regulator on the bench, inspect the window regulator plastic cable tube. It cannot be broken for the installation of the lift plate attachment
repair. If it is found to be broken, proceed to Step # 2 to replace the regulator.
5. Use the 8 inch adjustable wrench to bend down lower Rail Bracket Tab 90° (Fig 1).
6. Remove and save the small black plastic bumper located in the end of the rail (Fig 2).
