Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
INSTALLATION
1. Install the panel door actuator (2) or the floor/defrost door actuator (4) as required, by engaging the hole in the end of the actuator link to the
hooked pin on the end of the door lever located on the driver side of the HVAC housing (5).
2. Install the actuator(s) onto the actuator mount(s).
3. Connect the vacuum harness connectors (1 and 3) to the actuators as required.
4. Install the knee blocker.
5. Reconnect the negative battery cable.
