Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
Vanity Lamp: Service and Repair
VANITY LAMP
BULB
NOTE: Vehicles equipped with optional vanity lamps have a mirror with a lamp that is integral to each sun visor. Each lamp is independently controlled
by an integral switch that is automatically actuated by the mirror cover. The bulb types and service procedures are identical for both of these lamps.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Insert a small thin-bladed tool on either side of the mirror (2) near the top or the bottom between the vanity lamp lens (1) and the sun visor (3)
vanity lamp housing.
3. Carefully pry the lens outward until it unsnaps from the lamp housing.
4. Using small needle-nose pliers (4), carefully grasp the bulb (5) and pull the base out of the lamp socket (3).
INSTALLATION
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the
socket and/or the lamp wiring.