Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
16. Carefully bend the tab back up in its original location with the adjustable wrench. A hammer can be used to carefully tap the Bracket Tab into its
final closed position. (Fig 8).
17. Reinstall the rebuilt window regulator back into the door. Torque the retaining bolts to 9 NM (80 in lbs).
NOTE:
Confirm that the glass is fully snapped into the lift plate.
18. Verify the operation of the window before installing the door panel.
19. **DO any of the repaired windows exhibit a chatter condition during its up or down travel after making the Lift plate repair?**
a. Yes >>> proceed to Step # 20
b. No >>> Complete the reassembly of the inner door panel and related components. No further repair needed. Repair complete
20. If the chatter is eliminated when water is sprayed onto the window channel run, the window channel needs to be replaced.
21. Following the procedures in DealerCONNECT > TechCONNECT under: Service Info > 23 - Body > Door-Front / Rear > Channel, Door Glass, to
replace the Glass Run Channel Seal.
22. Verify the operation of the window.
23. Complete the reassembly of the inner door panel and related components.
POLICY:
Reimbursable within the provisions of the warranty.
