Liberty 4WD V6-3.7L (2009)
Trailer Connector: Service and Repair
Trailer Tow Connector - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Reach underneath and behind the bracket (2) for the trailer tow connector (3) to access and disconnect the body wire harness connector (1).
3. Grasp the trailer tow connector (1) firmly from the face of the bracket (2) and rotate it 90 degrees counterclockwise to unlock it.
4. Pull the trailer tow connector straight rearward to remove it from the hitch receiver bracket.
