Liberty 4WD V6-3.7L (2009)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Fascia - Removal
REMOVAL
1. Remove both of the front wheel liners only enough to gain access to the bolts. Refer toSee: Fender/Front Fender/Front Fender Liner/Service and
Repair/Splash Shield - Removal.
2. Remove the side screws (3) attaching the fascia to the wheel moldings.
3. Remove the push pins (4) securing fascia (5) to radiator support (3).
4. Release the tabs securing the fascia to the grille opening reinforcement.
5. If equipped, disconnect the electrical connectors from both of the fog lamp assemblies.
