Liberty 4WD V6-3.7L (2009)
Rear Bumper Shock Absorber: Service and Repair
Rear Energy Absorber - Installation
INSTALLATION
1. Position the rear absorber (2) to the body (1) then use hand pressure on the rear absorber until the plastic clips snap into place securing the rear
absorber to the body.
2. Install the four rivets (3) through the rear absorber (2) and into body (1).
3. Install the rear fascia, See: Rear Bumper Cover / Fascia/Service and Repair/Rear Bumper Fascia - Installation.