Liberty 4WD V6-3.7L (2009)
Console: Service and Repair
Floor Console - Removal
Floor Console Base
REMOVAL - CONSOLE, Floor, Base
1. Disconnect and isolate battery negative cable.
2. Using a trim stick C-4755 or equivalent, pry the shift bezel out of the floor console.
3. If equipped, remove electrical connectors attached to shift bezel.
4. Open console lid (1).
5. Using a trim stick C-4755 or equivalent, release the fasteners at the four locations around the floor console end cap (2).
6. Disconnect electrical connectors (3) from end cap (2).
7. Remove end cap (2).
