Liberty 4WD V6-3.7L (2009)
8. Remove ash cup (3) from console (1).
9. Remove bin (4) from console (1).
10. Remove two screws (2) from front of console (1).
11. Remove two screws (5) from rear of console (1) located inside the console bin.
12. Lift console (1) at back and remove.
Floor Console End Cap
REMOVAL
1. Open console lid (1).
2. Using a trim stick C-4755 or equivalent, release the fasteners at the four locations around the floor console end cap (2).
3. Disconnect electrical connectors (3) from end cap (2).
4. Remove end cap (2).
Floor Console Lid
REMOVAL
