Liberty 4WD V6-3.7L (2009)
Radiator Support: Service and Repair
Radiator Upper Crossmember - Installation
INSTALLATION
1. Install the crossmember (1) and install the bolts (3).
2. Tighten the bolts to 10 Nm (85 in. lbs.).
3. Install the hood latch support (5) and install the bolts (4).
4. Tighten the bolts to 10 Nm (85 in. lbs.).
5. Install new rivets (2) attaching the hood latch support to the crossmember.
6. Install the hood latch, See: Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair/Hood Latch - Installation
7. Install the grille, See: Grille/Service and Repair/Grille - Installation.
8. Install a new rivet securing the washer bottle to the crossmember.
