Liberty 4WD V6-3.7L (2009)
NOTE: Front drive assembly shown, rear drive assembly similar.
2. Push the drive cables into the tracks leaving the hole in the cable end (3) exposed.
NOTE: It may be necessary to twist the cables while pushing to fully install the cables.
3. Insert the rear of the drive assembly (1) into the drive channel.
4. Connect the drive links (4) to the drive cable ends (3) and make sure that the nylon buttons (2) are facing up.
CAUTION: When moving the drive assemblies without the motors attached make sure that the assemblies are moved straight back.
5. Push the drive assembly back into the tracks.
CAUTION: When moving the drive assemblies without the motors attached make sure that the assemblies are moved straight back.
6. Manually push the rear drive assembly (1) rearward fully.
7. Using a small screwdriver or equivalent, make sure the cable ends (2) are in contact with the frame (3).