Liberty 4WD V6-3.7L (2009)
1. Install the seat belt assembly and bolt to the seat back frame and tighten to 47.5 Nm (35 ft. lbs.).
2. Install the seat back cover to the seat back cushion and install new hog rings.
3. Feed the seat belt through the cushion and cover.
4. Install the cover and cushion to the seat back frame, pull the seat cover tight around the cushion and seat frame.
NOTE: Replace any head rest guide's damaged during removal.
5. Install the head rest guides to the top of the seat cushion.
6. Install the seat belt trim to the top of the seat back cushion.
7. Secure the seat cover retainers (1, 3).
8. Install the 60 seat back assembly. See: Removal and Replacement/Seat Back - Installation
