Liberty 4WD V6-3.7L (2009)
7. Install the seat bolt (1) to the floor bracket (2) on the right side of the 40 seat and tighten to 27.5 Nm (20 ft. lbs.).
8. Connect the cable housing (1).
9. Secure the seat cushion cover clips (1).
7. Install the seat bolt (1) to the floor bracket (2) on the right side of the 40 seat and tighten to 27.5 Nm (20 ft. lbs.).
8. Connect the cable housing (1).
9. Secure the seat cushion cover clips (1).