Liberty 4WD V6-3.7L (2009)
Door Lock Cylinder Switch: Service and Repair
Tailgate Lock Cylinder Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the tailgate trim panel.See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate
Trim Panel - Removal.
3. Remove the retainer clip from the pin on the back of the door lock cylinder (3).
4. Remove the washer from the pin on the back of the door lock cylinder.
5. Remove the door cylinder lock switch (4) from the back of the lock cylinder.