Liberty 4WD V6-3.7L (2009)
Door Lock Cylinder Switch: Service and Repair
Tailgate Lock Cylinder Switch - Installation
INSTALLATION
1. Position the tailgate cylinder lock switch (4) onto the back of the lock cylinder (3) with the wire harness oriented toward the bottom.
2. Position the washer over the switch.
3. Install the retainer (2) clip onto the pin on the back of the tailgate lock cylinder. Be certain that the center tab of the retainer is engaged in the
retention hole on the lock lever.
4. Install the trim panel See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim Panel -
Installation.
5. Connect the battery negative cable.