Liberty 4WD V6-3.7L (2009)
Brake Rotor/Disc: Testing and Inspection
Brake Drum in Hat Rotor
BRAKE DRUM IN HAT ROTOR
The maximum allowable diameter of the drum braking surface is indicated on the drum outer edge. Always replace the drum if machining would cause
drum diameter to exceed the size limit indicated on the drum in hat.
BRAKE DRUM RUNOUT
Measure drum diameter and runout with an accurate gauge. The most accurate method of measurement involves mounting the drum in a brake lathe and
checking variation and runout with a dial indicator.
Machine the drum if runout or variation exceed values. Replace the drum in hat rotor if machining causes the drum in hat rotor to exceed the maximum
allowable diameter.
