Liberty 4WD V6-3.7L (2009)
7. Remove old grommets (2) from cylinder body (1).
Brake Master Cylinder Reservoir - Installation
INSTALLATION
CAUTION: Do not use any type of tool to install the grommets (2). Tools may cut, or tear the grommets creating a leak problem after
installation. Install the grommets using finger pressure only and insure that the grommets are properly seated and checked for
leaks after installation.
1. Lubricate new grommets (2) with clean brake fluid and Install new grommets (2) onto reservoir outlets (1). Use finger pressure to install and seat
grommets.
2. Start reservoir (1) and grommets into holes on master cylinder.