Liberty 4WD V6-3.7L (2009)
Parking Brake Backing Plate: Service and Repair
Brake Backing Plate - Installation
INSTALLATION
1. Install support plate (1) on axle flange. Tighten attaching bolts (2) to 115 Nm (85 ft. lbs.).
2. Install the park brake shoes, See: Parking Brake Shoe/Service and Repair/Removal and Replacement/Installation.
3. Install axle shaft, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair/Rear
Axle - 8 1/4/Installation.
4. Adjust brake shoes to drum with brake gauge See: Parking Brake Shoe/Adjustments.
5. Install the rotor See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation.
6. Install the caliper See: Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation.
7. Install the wheel and tire assembly See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement.
