Liberty 4WD V6-3.7L (2009)
Front Crankshaft Seal: Service and Repair
Front Crankshaft Oil Seal - Removal
REMOVAL
1. Disconnect negative cable from battery.
2. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Removal.
3. Remove A/C compressor mounting fasteners and set aside.
4. Drain cooling system See: Cooling System/Service and Repair.
5. Remove upper radiator hose.
6. Disconnect electrical connector for fan mounted inside radiator shroud.
7. Remove radiator shroud attaching fasteners.
8. Remove radiator cooling fan and shroud See: Cooling System/Radiator Cooling Fan/Service and Repair/Electric Radiator Fan - Removal
9. Remove crankshaft damper bolt.
10. Remove damper using the Crankshaft Insert 8513A (1) and the Three Jaw Puller 1026 (2).