Liberty 4WD V6-3.7L (2009)
10. Connect the A/C liquid line (1) to the condenser tube (2) and install the secondary retaining clip See: Coupler HVAC/Service and
Repair/Refrigerant Line Coupler - Installation.
11. Install the engine air cleaner housing.
12. Reconnect the negative battery cable.
13. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
14. If the A/C condenser is being replaced, add 30 milliliters (1 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple A/C
system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant systemSee: Service
and Repair/Refrigerant Oil Level. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
15. Charge the refrigerant systemSee: Service and Repair/Refrigerant System Charge.
