Liberty 4WD V6-3.7L (2009)
8. Remove the two screws (1) that secure the upper front passenger side floor duct (7) to the passenger side of the air distribution housing (8) and
remove the duct.
NOTE: If the foam seal for the heater core tube flange is deformed or damaged, it must be replaced.
9. Carefully remove the foam seal (3) from the heater core tube flange (4). If the seal is deformed or damaged, it must be replaced.
10. Remove the screw (2) that secures the heater core tube flange to the air distribution housing.
11. Disengage the plastic retainer (5) from around the heater core tubes (6) and remove the flange.
NOTE: If the foam insulator around the heater core is deformed or damaged, the insulator must be replaced.
12. Disengage the four plastic retaining tabs (1) that secure the heater core (2) to the passenger side of the air distribution housing (3) and carefully
remove the heater core from the housing.
13. Carefully cut the foam seal (1) along the parting line (2) of the two halves of the air distribution housing (3 and 6). If the seal is deformed or
