Liberty 4WD V6-3.7L (2009)
Auxiliary Power Outlet: Service and Repair
AC Power Outlet - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open the console lid (1) and remove the two screws (2).
3. Using a trim stick C-4755 or equivalent, release the fasteners at all of the locations around the floor console trim panel (3).
4. Lift up and rearward to release the panel (3) from the floor console.
5. Disconnect the electrical connectors (4) from the panel (3).
6. Remove AC power outlet from the trim panel.
