Liberty 4WD V6-3.7L (2009)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Installation
INSTALLATION
WARNING: Risk of injury to eyes and skin from contact with fuel. Wear protective clothing and eye protection. Risk of poisoning from
inhaling and swallowing fuel. Pour fuel only into appropriately marked and approved containers. Failure to follow these
instructions may result in possible serious or fatal injury.
CAUTION: Whenever the fuel pump module is serviced, the rubber O-ring seal must be replaced.
1. Clean the rubber O-ring seal area of the fuel tank and install a new rubber O-ring seal.
2. Lower the fuel pump module into the fuel tank using caution not to bend the float arm.
