Liberty 4WD V6-3.7L (2009)
2. Remove the lower trim from the inside of the lower right or left C-pillar (4). See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service
and Repair/Luggage Compartment Trim/Quarter Trim Panel - Removal.
3. Remove the nut (1) that secures the side impact sensor (2) to the weld stud on the lower C-pillar.
4. Remove the sensor from the weld stud on the inner C-pillar.
5. Disconnect the body wire harness connector (3) for the side impact sensor from the sensor connector receptacle.