Liberty 4WD V6-3.7L (2009)
Hood Sensor/Switch (For Alarm): Service and Repair
Vehicle Theft Security Hood Ajar Switch - Installation
INSTALLATION
1. Position the hood ajar switch (2) to the mounting hole in the adapter (1).
2. Press the switch down through the adapter mounting hole until the integral switch latch tabs lock it into place.
3. Pull the wire harness connector (4) up through the mounting tab of the front end module carrier mounting tab (3) and reconnect it to the switch
connector receptacle.
4. Insert the switch and adapter into the mounting tab and press them downward until the adapter snaps into place.
5. Reconnect the battery negative cable.
6. Close and latch the hood.