Liberty 4WD V6-3.7L (2009)
Sunroof / Moonroof Switch: Description and Operation
Sunroof Switch - Description
Power Systems
DESCRIPTION
The power sunroof switch (2) is a combination push-button and rocker switch module mounted in the overhead console assembly (1). The sunroof switch
is a direct contact unit that is directly wired to the sunroof motor/module assembly. The sunroof switch performs the following functions:
-
Power sunroof open (back of switch pushed)
-
Power sunroof express open (back of switch pushed and released)
-
Power sunroof closed (front of switch pushed)
-
Power sunroof express closed (front of switch pushed and released)
-
Power sunroof vent (switch center button pushed)
The power sunroof switch is part of the overhead console assembly and cannot be serviced separately. If the switch is damaged or inoperative the
overhead console assembly must be replaced, See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhead Console - Removal.
Sunroof
DESCRIPTION
Vehicles equipped with a power sunroof utilize a sunroof control switch. On this model, the sunroof control switch is located in the overhead console, in
between the two reading lamps. The switch is mounted in the overhead console with four plastic retaining tabs, molded into the switch housing.
This switch incorporates four selections of operation open, auto open, close and vent. The individual switches in the sunroof control switch unit cannot
be repaired. If one switch is damaged or faulty, the entire sunroof control switch unit must be replaced.
