Liberty 4WD V6-3.7L (2009)
Alternator: Service and Repair
Generator Decoupler - Installation
INSTALLATION
INA Decoupler
1. Thread the decoupler pulley onto the generator shaft by hand (right-hand threads).
2. Position the Special Tool 8823 (VM.1048) into the decoupler.
3. Determine if the end of generator shaft is hex shaped or is splined. If hex is used, insert a 10MM deep socket (1) into the tool 8823 (VM.1048) or.
4. .if splined, insert a 5/16" 6-point hex driver (1), or a 10MM 12-point triple square driver into tool 8823 (VM.1048).
5. Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a
