Liberty 4WD V6-3.7L (2009)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler - Installation
INSTALLATION
1. Install the cooler (1) from the bottom between the front fascia (2) and core support.
2. Install the front fascia push pins.
3. Install the 3 mounting screws (3) for the cooler (1). Tighten to 4 Nm (35 in. lbs.).
4. Install and reclamp (2) the cooler hoses to the cooler (1) using new crimp clamps.
5. Lower the vehicle.
6. Refill the power steering fluid See: Service and Repair/Steering - Power Steering System Bleeding.