Liberty 4WD V6-3.7L (2009)
10. Install the battery tray (1) See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Tray - Installation.
11. Install the battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery - Installation.
12. Reinstall the power center (2) back into place.
13. Reconnect the battery cables (3).
Right
RIGHT SIDE
1. Install the spring to the shock (if removed). See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front Coil Spring - Installation.
2. Install the shock assembly (1) to the vehicle.
3. Install the four upper shock mounting nuts. Tighten the nuts to 108 Nm (80 ft.lbs.).
4. Raise the knuckle (3) into place and reconnect the upper ball joint nut. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.
