Liberty 4WD V6-3.7L (2009)
Shift Cable: Service and Repair
Shift Cable - Installation
INSTALLATION
1. Install the shift cable to the shifter assembly bracket. Push cable into the bracket until secure.
2. Place the floor shifter lever in PARK position.
3. Loosen the adjustment screw on the shift cable.
4. Snap the shift cable onto the shift lever pin.
5. Raise the vehicle.
6. Install the shift cable to the shift cable support bracket.
7. Shift the transmission into PARK. PARK is the rearmost detent position on the transmission manual shift lever.
8. Snap the shift cable onto the transmission manual shift lever.
