Liberty 4WD V6-3.7L (2009)
Control Module: Service and Repair
Final Drive Control Module - Removal
REMOVAL
NOTE: The FDCM has two electrical connectors and is installed inside the passenger compartment behind the driver side knee bolster and is
mounted to the left kick panel. On RHD vehicles the FDCM is located in a mirrored position on the right side.
1. Lower the drivers side knee bolster.
2. Push out on the two locking tabs (1) and remove the FDCM.
3. Disconnect the two electrical connectors (1) from the FDCM.
