Liberty 4WD V6-3.7L (2009)
Repair/Gas Prop - Removal.
NOTE: It is not necessary to remove the glass to replace one or both hinges. The hinges can be replaced one at a time.
2. Open the flipper glass (1).
3. Using a grease pencil or equivalent, mark the position of the hinge (2) on the body to aid installation.
4. Remove the hinge to body bolts (3).
CAUTION: Do not allow glass to twist on remaining hinge when the other hinge is being serviced. Damage to the hinge that is not being
serviced may result.
5. Remove the bolt (1) and remove the hinge (4).
Flip-Up Glass Hinge - Installation
INSTALLATION
