Liberty 4WD V6-3.7L (2009)
REMOVAL
1. Remove the trim panel (3), See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Liftgate Trim Panel - Removal.
2. Disconnect the electrical connectors (2, 4).
3. Remove the nuts (3) and remove the latch.
Flip-Up Glass Latch - Installation
INSTALLATION
1. Install the latch onto the liftgate studs (1) and install the nuts (3).
2. Tighten the nuts (3) to 13 Nm (115 in. lbs.)
3. Connect the electrical connectors (2, 4).