Liberty 4WD V6-3.7L (2009)
Windshield: Service and Repair
Windshield - Removal
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions See: Service Precautions.
2. Remove inside rear view mirror, See: Body and Frame/Mirrors/Service and Repair/Interior Rearview Mirror - Removal.
3. Remove the wiper arms, See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Removal.
4. Remove the hood seal (3).
5. Use a trim stick C-4755 or equivalent, separate the cover assembly from the a-pillar.
6. Remove the four push pins (2) and remove the cowl grille (1) from the body (4).
7. Using a trim stick C-4755 or equivalent, remove the push pin (1).
8. Remove the windshield A-pillar molding (2) and clips (3) from the windshield A-pillar.
