Liberty Limited Edition 2WD V6-3.7L VIN K (2002)
Radio/Stereo Noise Filter: Service and Repair
RADIO NOISE SUPPRESSION GROUND STRAP
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.11 Ground Strap To Engine - 3.7L
2. Remove the retaining bolts from the engine cylinder heads.
Fig.12 Ground Strap To Plenum - 3.7L
3. Remove the retaining nut from the plenum.
INSTALLATION
1. Install the retaining nut and ground strap to the plenum. Tighten to 12 Nm (106 in. lbs.).
2. Install the retaining bolts and ground strap to the engine cylinder heads. Tighten to 12 Nm (106 in. lbs.).
3. Connect the battery negative cable.
