Liberty Limited Edition 2WD V6-3.7L VIN K (2002)
Fig. 2 Engine Block Heater - 2.4L
2. Insert heater assembly with element loop positioned upward
Fig. 3 Engine Block Heater - 3.7L
3. With heater seated, tighten center screw securely to assure a positive seal.
CAUTION: To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or exhaust
manifold.
4. Connect power cord to heater.
5. Lower vehicle.
6. Fill cooling system.
