Liberty Limited Edition 2WD V6-3.7L VIN K (2002)
Fluid - A/T: Service and Repair
Cleaning and Inspection
45RFE - AUTOMATIC TRANSMISSION
STANDARD PROCEDURE - FLUID AND FILTER INSPECTION
Inspect bottom of pan and magnet for excessive amounts of metal.
A light coating of clutch material on the bottom of the pan does not indicate a problem unless accompanied by a slipping condition or shift lag.
If fluid and pan are contaminated with excessive amounts of debris, refer to Testing and Inspection.
See: Testing and Inspection
CLEANING
1. Using a suitable solvent, clean pan and magnet.
2. Using a suitable gasket scraper, clean original sealing material from surface of transmission case and the transmission pan.
