Liberty Limited Edition 2WD V6-3.7L VIN K (2002)
Hose/Line HVAC: Service and Repair
A/C Liquid Hose/Line Replacement
REMOVAL
WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE
FOLLOWING OPERATION.
1. Disconnect and isolate the battery negative cable.
2. Recover the refrigerant.
Fig.8 Liquid Line Remove/Install
3. Disconnect the liquid line refrigerant line couplers at the evaporator inlet and the condenser outlet. Install plugs in, or tape over all of the opened
refrigerant line fittings.
4. Remove the liquid line from the vehicle.
INSTALLATION
WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE
FOLLOWING OPERATION.
1. Remove the tape or plugs from the refrigerant line fittings on the liquid line, the evaporator inlet and the condenser outlet. Connect the liquid line
to the evaporator inlet and condenser outlet refrigerant line couplers.
2. Connect the battery negative cable.
3. Evacuate the refrigerant system.
4. Charge the refrigerant system.
