Liberty Sport 2WD L4-2.4L VIN 1 (2002)
CD Changer: Description and Operation
A factory-installed Compact Disc (CD) changer featuring a six-CD magazine is an available option on this model. The CD changer is mounted in the
cargo area of the passenger compartment on the right rear quarter panel.
The controls on the radio receiver operate the CD changer through messages sent over the Programmable Communications Interface (PCI) data bus
network. For diagnosis of the messaging functions of the radio receiver and the CD changer, or of the PCI data bus, a DRB scan tool and the proper
Diagnostic Procedures manual are required.
The CD changer can only be serviced by an authorized radio repair station. See the latest Warranty Policies and Procedures manual for a current listing
of authorized radio repair stations. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and
connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness
connectors, splices and grounds.
The CD changer will only operate when the ignition switch is in the ON or Accessory positions, and the radio is turned ON. The six-CD magazine may
be ejected with the ignition in the OFF position. For more information on the features, loading procedures and radio control functions for the operation
of the CD changer, refer to the owner's manual.