Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Speaker: Service and Repair
Speaker Replacement - Instrument Panel
INSTRUMENT PANEL SPEAKER
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the A-pillar trim.
3. Remove instrument panel top cover.
Fig.23 Instrument Panel Speaker
4. Remove speaker mounting screws.
5. Remove speaker and disconnect the wire harness connector.
INSTALLATION
1. Connect wire harness connector and install speaker.
2. Install speaker mounting screws. Tighten to 2 Nm (20 in. lbs.).
3. Install instrument panel top cover.
4. Install the A-pillar trim .
5. Connect the battery negative cable.
